Premium 1x1 Galvanized Square Tubing | Factory-Direct for Quality Construction

Mechanical properties

Standard	Product Level	Steel Grade	Yield Strength (min), Mpa	Tensile Strength（MPa）
API 5L GB/T9711.2	PSL 1	A or L210	210	335
		B or L245	245	415
		x42 or L290	290	415
		X46 or L320	320	435
		X52 or L360	360	460
		X56 or L390	390	490
		X60 or L415	415	520
		X70	483	565
	PSL 2	BR or L245R	245~450	415~760
		X42R or L290R	290~495	415~760
		BN or L245N	245~450	415~760
		X42N or L290N	290~495	415~760
		X46N or L320N	320~525	435~760
		X52N or L360N	360~530	460~760
		X56N or L390N	390~545	490~760
		X60N or L415N	415~565	520~760
		X65N or L450N	425~566	525~760
		X70 or L480	484~565	565~768
		X80	552~690	621~827

Table of chemical Elements in pipeline

Product Level	Steel Grade	Chemical Composition, %
Product Level	Steel Grade	C	Mn	P	S	And	IN	Nb	Of	CEpcm
PSL 1	B or L245	≤0.28	≤1.20	≤0.030	≤0.030	-	-	-	-	-
	x42 or L290	≤0.28	≤1.30	≤0.030	≤0.030	-	-	-	-	-
	X46 or L320	≤0.28	≤1.40	≤0.030	≤0.030	-	-	-	-	-
	X52 or L360	≤0.28	≤1.40	≤0.030	≤0.030	-	-	-	-	-
	X56 or L390	≤0.28	≤1.40	≤0.030	≤0.030	-	-	-	-	-
	X60 or L415	≤0.28	≤1.40	≤0.030	≤0.030	-	-	-	-	-
	X70	≤0.28	≤1.40	≤0.030	≤0.030	-	-	-	-	-
PSL 2	BR or L245R	≤0.24	≤1.20	≤0.025	≤0.015	≤0.40	c	c	≤0.04	≤0.25
	X42R or L290R	≤0.24	≤1.20	≤0.025	≤0.015	≤0.40	≤0.06	≤0.05	≤0.04	≤0.25
	BN or L245N	≤0.24	≤1.20	≤0.025	≤0.015	≤0.40	c	c	≤0.04	≤0.25
	X42N or L290N	≤0.24	≤1.30	≤0.025	≤0.015	≤0.40	≤0.06	≤0.05	≤0.04	≤0.25
	X46N or L320N	≤0.24	≤1.40	≤0.025	≤0.015	≤0.40	≤0.07	≤0.05	≤0.04	≤0.25
	X52N or L360N	≤0.24	≤1.40	≤0.025	≤0.015	≤0.45	≤0.10	≤0.05	≤0.04	≤0.25
	X56N or L390N	≤0.24	≤1.40	≤0.025	≤0.015	≤0.45	≤0.10	≤0.05	≤0.04	≤0.25
	X60N or L415N	≤0.24	≤1.40	≤0.025	≤0.015	≤0.45	≤0.10	≤0.05	≤0.04	-
	X65N or L450N	≤0.24	≤1.40	≤0.025	≤0.015	≤0.45	≤0.10	≤0.05	≤0.04	-
	X70N	≤0.24	≤1.40	≤0.025	≤0.015	≤0.45	≤0.10	≤0.05	≤0.04	-
	X80	≤0.24	≤1.40	≤0.025	≤0.015	≤0.45	≤0.10	≤0.05	≤0.04

Alloy square rectangular tube Also known as square and rectangular cold formed hollow steel, referred to as square pipe and rectangular pipe, code F and J respectively 1. Alloy square rectangular tube The allowable deviation of wall thickness shall not exceed positive or negative 10% of the nominal wall thickness when the wall thickness is less than 10mm, and positive or negative 8% of the nominal wall thickness when the wall thickness is greater than 10mm, except for the wall thickness of the corner and weld zone. 2. Alloy square rectangular tube Usually the delivery length is 4000mm-12000mm, with 6000mm and 12000mm in the majority. Square rectangular tube allows delivery of not less than 2000mm short and irregular products, can also be delivered in the form of interface tube, but the customer should remove the interface tube when using. The weight of short and irregular length products shall not exceed 5% of the total delivery quantity, and for square rectangular tubes with theoretical weight greater than 20kg/m shall not exceed 10% of the total delivery quantity 3. Alloy square rectangular tube The bending must not be greater than 2mm per meter and the total bending must not be greater than 0.2% of the total length 4. Alloy square rectangular tube According to the production process: hot rolled seamless square tube, cold drawn seamless square tube, squeeze seamless square tube, welded square tube. The welded square pipe is divided into 1, according to the process: arc welding square tube, resistance welding square tube (high frequency, low frequency), gas welding square tube, furnace welding square tube 2, according to the weld - straight seam welding square pipe, spiral welding square pipe.

Section Shape Classification

Square pipes are classified according to section shape: 1, simple section of square tube: square tube, rectangular square tube. 2, complex section square tube: flower shaped square tube, open square tube, corrugated square tube, shaped square tube.